Repair, reclaim, reinforce & extend the life of all types of metal & concrete pipes & tanks.
DuraWrap polymer/carbon fiber reinforced composite makes repairing and rebuilding aging, often severely deteriorated piping, tanks and other fluid flow equipment possible.
The ENECON DuraWrap composite, a unique marriage of ENECON ‘s high performance polymers and cutting-edge, space-age carbon fiber technology, was specifically created to repair, rebuild, reinforce and even restore the integrity of such fluid flow systems – thereby greatly extending their service life and eliminating the need for expensive replacement.
DuraWrap can be applied to the interior and/or exterior of piping and equipment to both seal and strengthen these components. When applied to the interior walls of underground or otherwise inaccessible piping, DuraWrap™ can effectively repair and restore piping integrity without expensive excavation and replacement.
The outstanding performance of the ENECON DuraWrap system allows today’s maintenance professional to extend the service life of yesterday’s equipment and structures.
- 100% Solids
- Requires No Heat
- Ultra High Tensile Strength
- Extraordinary Adhesion
- Safe & Simple To Use
- No Special Tools Required
Mixing Ratios
| Base | Activator | ||
|---|---|---|---|
| DuraWrap Primer | By volume | 2.8 | 1 |
| By weight | 9 | 2 | |
| DuraWrap Polymer | By volume | 2.2 | 1 |
| By weight | 5 | 2 |
DuraWrap System Properties
(Based on a two-ply composite using 12K x 3K Carbon Fiber)
| Typical Values | Test Method | ||
|---|---|---|---|
| Indefinite Shelf Life | |||
| Tensile Strength | 123,600 psi | 8,650 kg/cm2 | ASTM D-3039 |
| Tensile Modulus | 8,450,000 psi | 591,500 kg/cm2 | ASTM D-3039 |
| Elongation | 1.38% | ASTM D-3039 | |
| Flexural strength | 97,400 psi | 6,820 kg/cm2 | ASTM D-790 |
| Flexaural Modulus | 7,950,000 psi | 556.550 kg/cm2 | ASTM D-790 |
| Adhesion to Steel | > 3,500 psi | > 245 kg/cm2 | ASTM D-1002 |
| Adhesion to Concrete | Greater than the cohesive strength of the concrete. | ASTM D-4541 | |
Cure Times - DuraWrap Primer
| Ambient Temperature | Working Life | Touch Dry | Full Cure | |
|---|---|---|---|---|
| 59°F | 15°C | 2 hrs. | 12 hrs. | 5 days |
| 77°F | 25°C | 60 min. | 6 hrs. | 3 days |
| 86°F | 30°C | 40 min. | 4 hrs. | 2 days |
Cure Times - DuraWrap Polymer
| Ambient Temperature | Working Life | Touch Dry | Full Cure | |
|---|---|---|---|---|
| 59°F | 15°C | 90 min. | 18 hrs. | 7 days |
| 77°F | 25°C | 45 min. | 9 hrs. | 4 days |
| 86°F | 30°C | 30 min. | 6 hrs. | 3 days |
